Fleece SureFlo Performance Sending Unit for 2005-2009 Dodge Ram 5.9L/6.7L Cummins
FPEFPE-SF-CUMM-0509You don't have to drill for a sump to run a FASS or AirDog on a 2005-2009 Ram.
SureFlo is made to work with externally mounted aftermarket lift pumps and fits right in the stock sending unit spot. It feeds your pump from a bucket at the base of the unit so it never sucks air, and the dreaded 1/4 tank problem goes away. It's also a good fix if your level sender is acting up.
Features
- Drops into the stock sending unit location with no tank cutting or drilling
- Factory style quick disconnects adapt your stock fuel lines at the tank for a clean install
- Draws fuel from and returns fuel to the bucket assembly at the base of the unit, so your pump pulls fuel instead of air and the 1/4 tank problem goes away
- One way check valves in the bucket let fuel flow in easily, even at the lowest fuel levels
- New fuel level electronics and fuel float
- Heavy duty billet aluminum cap
- Universal -8 AN ports for professional plumbing of a custom fuel setup
- New O-ring or flange seal
- 8 to 3/4'-16 straight male fitting w/ O-ring
Note: SureFlo is not recommended for use with aftermarket lift pumps that exceed a 200 GPH rating.
Note: For MY 1998 trucks, this sending unit will work for both 12-valve and 24-valve models. The stock sending unit in both cases will have a range between 20-220 ohms.
Specs
- Type: Performance sending unit for external lift pumps
- Engines: 5.9L / 6.7L Cummins
- Part number: FPE-SF-CUMM-0509
Tuning with PPEI
PPEI recommends a clean fuel supply on any tuned Cummins, and Fleece fuel parts are on our own trucks. With PPEI engine tuning on board, SureFlo keeps fuel pressure steady, so the truck makes the same power and throttle response at a quarter tank as it does full.
Fitment
- Dodge Ram 2500: 2005-2009 Laramie, SLT, ST; 2006-2007 Sport, TRX4; 2008-2009 SXT
- Dodge Ram 3500: 2005-2009 Laramie, SLT, ST; 2006-2007 Sport; 2008-2009 SXT; 2007 TRX4
Couldn't load pickup availability

WHO IS THE TUNER/CALIBRATOR
PPEI, also known as Power Performance Enterprises, Inc., is led by the business owner and lead calibrator/tuner Kory Willis. PPEI began calibrating/tuning back in 2008, specializing in Diesel Performance but has since expanded into the Gas and Powersports industries. Kory and the team at PPEI have set many world records along with continuing many industry “firsts”. We take pride in knowing that Kory not only prides his work, but also thoroughly enjoys setting expectations high for our team so our customers can have the best products available in the world.












